• If you enjoy the forum please consider supporting it by signing up for a NES Membership  The benefits pay for the membership many times over.

Search results

  1. Finally! The Osprey arrives....

    Well, almost 11 months after forking over close $1000 between the dealer and the ATF I have a stamp and suppressor. Meet the Osprey 45. Can't wait to get out to the desert to shoot it!
  2. Anyone have a Savage 10BA with a Larue scope mount on it?

    I have a friend that picked up a Savage 10BA and wanted to use a Larue QD mount on it (specifically the OBR LT-111), but it seems the rail isn't 1913 std. He's been going round and round with Savage and they swear it's in spec. They've even sent him a new rail which still won't allow the mount...
  3. M16, other guns taken from Milford man....

    And I thought I had problems. I hope everything works out for this guy and his family. LINK M16, other guns taken from Milford man MILFORD — A Milford man was arrested and police seized more than a dozen of his guns, including an M16 and AK47, after officers went to his home...
  4. Anyone come across .50 Beowulf ammo in MA?

    Has anyone seen .50 beowulf ammo or the reloading components available in MA at any of the local stores? Thanks
  5. Dillon RT-1200 and Nato 7.62x51 brass won't fit to trim it....

    Has anyone tried using the RT-1200 trimmer on Nato LC stamped 7.62x51 brass? I've de-primed and re-sized the brass with a Lee .308 die & swaged the pocket with my 600. When I try to insert the case into the .308 trimmer die it will not allow the neck of the case to enter the top of the die to be...
  6. Review: Dawson Precision Rear adjustable FO & front FO sights for the S&W M&P

    I just wanted to put up a quick review about the new Dawson Precision Adjustable rear sight (FO) and front sight (FO) available now for the Smith & Wesson M&P line of guns (no I don't sell them nor am I affiliated with Dawson). All I did tonight was install the sights on my M&P9 FS, so I'll...
  7. .44 mag case expansion

    Hi All, I went to the range tonight to test some reloads in .44 rem mag and had some weird results. The gun is a Taurus 2-440089 (8 3/8 barrel), brass was a mix of Frontier and something with stars on it (the cases were given to me), powder was Titegroup or H110, primers were CCI large magnum...
  8. Sig .22lr conversion kit for P226 review

    I picked up one of the new Sig 22lr conversion kits for my P226 the other day from First Defense. The fit and finish of the kit is very nice. The rear sight is adjustable for windage and elevation. The slide comes with the new barrel, guide rod, and spring. Installing it on the P226 is as easy...
  9. StripLULA Review

    The other day I picked up a couple StripLULA's from Midway because I needed to make my $40+ order amount (I figured I'd get two just in case). I'll admit that I've seen the cool video of this little device, and was interested in how well it actually worked. Well this little piece of plastic is...
  10. Dillon's Rapid Trim 1200B Case Trimmer

    Any one have any experience with Dillon's Rapid Trim 1200B Case Trimmer? I'm thinking about picking one up for a 550. I'll be using it on .223 and .308 cases. Any input would be appreciated. Thanks
  11. I've had it....

    OK, I picked up a Loadmaster last year to get into reloading. The bench I was using became fairly unstable due to its design, and I started having problems with flipped primers, and stuff just getting loose. Needless to say I've been doing my reloading in .45, .357, .38, 9mm, and .223 on a...
  12. Need identity of rabbits....

    Can anyone identify these little buggers? They look like Eastern Cottontails, but I didn't think they were in South Central Mass. This is the second nest I've discovered in my back yard, and they're driving the dogs nuts! Thanks
  13. Nipmuc Rod and Gun

    Anyone know about Nipmuc Rod and Gun in Upton? Their web page doesn't say much about the facilities, and it doesn't look like they have a handgun range. Any members here?
  14. AFS - Tactical Handgun Defense Course (#LTC-018)?

    Any one know who's teaching this course at AFS, and whether it's worth it? Thanks
  15. Good Samaritan Beaten At Drive-Through

    Did anyone see this story on the news this AM? This one hits close to home as I live in this town, and know exactly where it took place. I sit here trying to think what I would do in this situation, and I don't like each of my ending scenarios. What would you have done if you ran into this...
  16. Bushmaster selling .50 BMG rifles!

    Wow! Anyone see this http://www.bushmaster.com/community_military_spotlight_ba50.asp? Bushmaster is gonna get a lot of my money this year with all the stuff they're coming out with [crying]
  17. Mass banning the use of lead?

    I didn't see this anywhere on the forum, and just received it as an alert from the NRA. Hopefully this goes no where.
  18. Sight installation tool?

    I'd like to replace sights on my 1911s, a Glock 21, and possibly a Beretta 92fs. Does anyone know of a decent sight removal/installation tool(s) that's pretty easy to use? Thanks for any info. Jr
  19. This state really sux!

    I just paid $49 a mag for Para P18 restricted 10 round magazines, while Mec-gar mags in the full 18 round capacity are $23 a piece [shocked]! No one on the web has them less than $42 a piece, and in stock [crying]. This really sux!!!! Rant done. Jr
  20. Has anyone seen one of these?

    Hi All, I have a cool little pistol here that came back with my Grandfather in WWII . It appears to be French made, and has custom grips (apparently made by my Gramps, and deteriorating) with a picture of my Grabdmother in them (the flash blurred the pic of her). The slide says Pistolet...
Top Bottom