Results 1 to 10 of 416
Thread: Reloading Bench Photos
06-05-2008, 01:09 PM #1
Reloading Bench Photos
I'm thinking about putting a new reloading bench together. My old one started out life as a kitchen table, modified it with some alterations, but it is still really just a table. Would like get some ideas from your benches (storage, press attachements etc), can you post pictures of your benches?
ThanksNRA Patron Member
NRA Certified Instructor
MA State Police Certified Instructor
NRA Range Safety Officer
06-05-2008, 01:21 PM #2
Here's mine a couple of years ago. This is made up from the steel base of a computer typesetting
system. I bolted some sides made out of panels from some other typesetting equipment. It must
weigh a good two or three hundred pounds without anything on it so it is pretty steady. The nice
part about the steel frame is that it has adjustable leveling feet so that contributes nicely to the
stability of the setup.
I also have a nice pdf of the NRMA reloading bench plans in a pdf file if you are interested. This is
a pic I took from the web from someone who built it. My apologies to the owner for appropriating it.
Last edited by Patriot; 08-21-2009 at 04:32 PM."Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Sir Winston Churchill
06-05-2008, 02:22 PM #3
This is the setup I put together in my basement. I need to get a vise for the bench, but other then that it's been working pretty well for me.
06-05-2008, 02:44 PM #4
This is from when I first set up the station - I have made some improvements and added some components (wish I had a more updated photo for ya)
06-05-2008, 03:29 PM #5
- Join Date
- Sep 2007
06-05-2008, 03:48 PM #6
- Join Date
- Dec 2005
- THE GREAT "BAY STATE"
EC1 ~ You might want to check this out. It's at Target's web site but not sold in their stores I believe. Good luck.
Available at Targets, online only.
Workbench With ShelfLinks, 6-Pack
Availability : Usually ships within 3 to 5 days This item is available online, but is not available in stores.
Prices, promotions, styles and availability may vary by store and online.
• The 2x4basics Workbench (with 6 free ShelfLinks) can be made any size to fit exactly where you need it. It can be made larger than other workbenches available
• You determine both the width and the length when you add your choice of lumber. Simple assembly requires only straight cuts. There is plenty of storage on each shelf that hold up to 1000 pounds
• This workbench can be so much more, too. Great for use as a craft table, tool stand, potting bench, and more. Made of heavy gauge, impact and solvent-resistant, maintenance-free structural resins
• Comes with 6 ShelfLinks for creating additional shelves, 2 clamps, and 4 multi-function hooks
• 22 lbs.
Last edited by 6hold; 06-05-2008 at 08:12 PM.
06-05-2008, 05:11 PM #7
This was in the place when I bought it (the bench, not the reloading stuff). Please excuse the mess:
06-05-2008, 06:07 PM #8
- Join Date
- May 2006
Here's my setup. I built this bench about 30 years ago from the NRMA plans that The Boston Patriot mentioned a few posts above. I had access to a 6' piece of stone countertop from an old chemistry lab, so modified the plans a bit to use that instead of the plywood top. It's served me well and has even survived being disassembled and reassembled as part of two household moves. I've managed to outgrow the storage space in the bench, however.
06-05-2008, 07:20 PM #9
06-05-2008, 09:33 PM #10
Here is my home away from home. The pics aren't very good but you get the idea.
I have a 650 and a 1050 with bullet feeder. (thanks John for making me buy this) The 1050 with K.I.S.S. feeder rules. If I start shooting limited again I will buy another 1050 and bullet feeder for .40 S&W.