Results 61 to 69 of 69
04-02-2012, 11:13 PM #61
04-02-2012, 11:50 PM #62
Yes, I'll watch for that closely. My lowest loading is less than a grain from the maximum loading. 5.4gr vs 6.1 (6.7 with FMJ, so figuring -10%) so I don't expect to see any squib loads, but I will of course look out for them. I visually inspected each charge, and weighed every 10th charge, and none varied more than .1gr
Regardless, I will be careful.
04-08-2012, 11:14 PM #63
Well the lowest loadings of the .40 cycled the Sig fine. I ended up settling on the middle loading which seems to be plenty, I probably put 100 or so through the sig without a single failure. Likewise, the AR ammo worked awesome. I think I am going to need a progressive press, but I'll probably stick with the single stage for some things, and for now.
Also, I have been decapping in a universal die prior to tumbling, should I bother doing this or save myself the extra step and just do it when I size the brass?
04-08-2012, 11:20 PM #64
I de-cap only if using wet SS tumbler. The ss doesn't miss much crud at all. I have a 30-06 die that I de-cap my 5.56 and similar diameters with but for 45acp I will need a new setup as I don't want to size prior to loading on the LnL.Licensed Journeyman.
04-11-2012, 11:32 AM #65
04-11-2012, 11:42 AM #66
04-11-2012, 06:47 PM #67
I have the universal decapper and have been using it before tumbling. With the single stage, however, the extra step is less than welcome.
04-12-2012, 02:57 PM #68I've got reloading classes scheduled in Ayer, Taunton, Lee, Concord (MA), and Northboro. Click here for a list.
Never rat on your friends, and always keep your mouth shut.
05-02-2012, 10:24 PM #69
Thinking of ordering the LNL right now, what books should I order to along with it?
Going to try and make that 6/9 class.Nemo Me Impune Lacesset
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." - Claire Wolfe
Flintoid be freed he must.