Results 1 to 6 of 6
08-21-2010, 01:09 PM #1
- Join Date
- Mar 2008
1100 1187 So whats the difference
I have had several Remington 1100's but never a 1187. I know the 1187 has a synethic stock and parkarized metal, are there any performance difference? Is the price difference only cosmetic? I new 1100 is about $900 1187 $675.I'm not fat, I just wear bell bottom shirts.
08-21-2010, 01:20 PM #2
I have seen 1187's with wooden stocks and blued metal.
Here's are some threads comparing the two shotguns: http://www.thehighroad.org/archive/i...p/t-35331.html , http://thefiringline.com/forums/show....php?p=1794043 , http://forums.gunbroker.com/topic.asp?TOPIC_ID=179524
Last edited by MA_Shooter; 08-21-2010 at 01:23 PM.“Who are the militia? Are they not ourselves? Is it feared, then, that we shall turn our arms each man against his own bosom. Congress has no power to disarm the militia. Their swords and every terrible implement of the soldier are the birthright of Americans. The unlimited power of the sword is not in the hands of either the federal or state governments but where, I trust in God, it will always remain, in the hands of the people. ” – Tench Coxe, The Pennsylvania Gazette, Feb. 20, 1788.
08-21-2010, 01:23 PM #3
- Join Date
- Jun 2008
- western ma
08-21-2010, 01:42 PM #4
From the Remington website:
What is the difference between the Model 1100 and Model 1187?
In 1987, the new gas compensated 1187 was introduced. The 1100 and the 1187 are similar in design. Barrels are not interchangeable between these models.
The gas cylinders are welded in slightly different locations. This is partly because the 11-87 has a longer magazine tube. The 11-87 also has 2 gas orifice holes. Only the 2-3/4 inch chambered version of the 1100 will have two. The magnum 1100 barrel has only one.
The 1100 can shoot only 2 3/4" or 3" shells depending on the barrel installed, and with the 1187 models with magnum barrels can shoot both 2 3/4" and 3" shells. To accomplish this, two additional holes are drilled in the top/front of the gas cylinder, and covered with a tempered steel spring. There is a relief cut made into the gas cylinder to accommodate the spring. The Model 1100 gas cylinder will not have the relief cut or the spring.
The Model 11-87 also has a slightly longer barrel extension. This is the part that connects directly into the receiver.
08-21-2010, 01:42 PM #5
Delete, Supermoto beat me to it.“Either the Constitution means what it says, or it doesn’t." ~ Judge Andrew Napolitano
08-21-2010, 01:49 PM #6
- Join Date
- Jun 2009
- Grid 17S with bugout longterm shelter and great fields of fire if needed, (CT Escapee also)
1187 is more money